分布埋入式光纤与隧道衬砌耦合性能试验及应用     

侯公羽  谢冰冰  韩育琛  胡涛  李子祥  杨兴昆  周天赐  肖海林 《岩土力学》2020,41(2):714-726

为探究埋入式光纤与隧道衬砌的耦合性能，分别从理论与试验两个方面进行研究，并在实际工程中进行了验证。构建了光纤、中间体和基体结构力学分析模型，进行光纤应变传递机制理论分析，计算了光纤应变传递效率；使用钢筋混凝土梁模拟隧道衬砌，进行了2组不同加载速率的试验。其中，在同一根梁内（同一工况）设计6种光纤的布设方式，以位移控制的方式在梁跨中部位进行单点多级加载，使用BOFDA（布里渊散射光频域分析）技术分别对6条光纤进行监测。试验结果表明：6条光纤均可以有效监测梁从开始加载至钢筋开始屈服阶段，光纤与梁耦合性最好；钢筋开始屈服直至梁破坏阶段，光纤应变不再增加甚至减小或呈现出光纤断裂的状态，此过程光纤与梁耦合性较差；除开槽埋入式光纤的有效监测应变差为3 000×10?6外，其余布设方式光纤有效监测应变差为2 000×10?6；光纤在长距离（>>146 mm）埋入式布设情况下可认为其应变传递效率接近100%，2组不同试验结果呈现相似规律。在北京市新机场线地铁暗挖隧道CRD工法区间进行了工程应用研究，监测结果表明分布埋入式光纤布设工艺是可行的，可为分布式光纤技术在地下工程结构监测中的应用提供有价值的参考。  相似文献   

A two‐dimensional coupled hydromechanical discontinuum model for simulating rock hydraulic fracturing          下载免费PDF全文

Yu‐Yong Jiao  Huan‐Qiang Zhang  Xiu‐Li Zhang  Hai‐Bo Li  Qing‐Hui Jiang 《国际地质力学数值与分析法杂志》2015,39(5):457-481

Within the framework of our discontinuous deformation analysis for rock failure algorithm, this paper presents a two‐dimensional coupled hydromechanical discontinuum model for simulating the rock hydraulic fracturing process. In the proposed approach, based on the generated joint network, the calculation of fluid mechanics is performed first to obtain the seepage pressure near the tips of existing cracks, and then the fluid pressure is treated as linearly distributed loads on corresponding block boundaries. The contribution of the hydraulic pressure to the initiation/propagation of the cracks is considered by adding the components of these blocks into the force matrix of the global equilibrium equation. Finally, failure criteria are applied at the crack tips to determine the occurrence of cracking events. Several verification examples are simulated, and the results show that this newly proposed numerical model can simulate the hydraulic fracturing process correctly and effectively. Although the numerical and experimental verifications focus on one unique preexisting crack, because of the capability of discontinuous deformation analysis in simulating block‐like structures, the proposed approach is capable of modeling rock hydraulic fracturing processes. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Tensionless–frictionless interaction of flexible annular foundation with a transversely isotropic multi‐layered half‐space          下载免费PDF全文

Morteza Eskandari‐Ghadi  Ghasem Gorji‐Bandpey  Azizollah Ardeshir‐Behrestaghi  Seyed Masoud Nabizadeh 《国际地质力学数值与分析法杂志》2015,39(2):155-174

A transversely isotropic multi‐layered half‐space, with axis of material symmetry perpendicular to the free surface, supports a flexible either annular or solid circle foundation. The contact area of the foundation and the half‐space is considered to be both frictionless and tensionless. The foundation is assumed to be affected by a vertical static axisymmetric load. Detailed analysis of the interaction of these two systems with different thickness of layers is the target of this paper. With the use of ring load Green's functions for both the foundation and the continuum half‐space, an integral equation accompanied with some inequalities is introduced to model the complex BVP. With the incorporation of ring‐shape FEM, we are capable of capturing both regular and singular solution smoothly. The validity of the combination of the analytical and numerical method is proved with comparing the results of this paper with a number of benchmark cases of both linear and nonlinear interaction of circular and annular foundation with half‐space. Some new illustrations are presented to portray the aspect of the anisotropy and layering of the half‐space. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Implicit integration under mixed controls of a breakage model for unsaturated crushable soils          下载免费PDF全文

Yida Zhang  Giuseppe Buscarnera 《国际地质力学数值与分析法杂志》2016,40(6):887-918

This paper discusses a series of stress point algorithms for a breakage model for unsaturated granular soils. Such model is characterized by highly nonlinear coupling terms introduced by breakage‐dependent hydro‐mechanical energy potentials. To integrate accurately and efficiently its constitutive equations, specific algorithms have been formulated using a backward Euler scheme. In particular, because implementation and verification of unsaturated soil models often require the use of mixed controls, the incorporation of various hydro‐mechanical conditions has been tackled. First, it is shown that the degree of saturation can be replaced with suction in the constitutive equations through a partial Legendre transformation of the energy potentials, thus changing the thermomechanical state variables and enabling a straightforward implementation of a different control mode. Then, to accommodate more complex control scenarios without redefining the energy potentials, a hybrid strategy has been used, combining the return mapping scheme with linearized constraints. It is shown that this linearization strategy guarantees similar levels of accuracy compared with a conventional strain–suction‐controlled implicit integration. In addition, it is shown that the use of linearized constraints offers the possibility to use the same framework to integrate a variety of control conditions (e.g., net stress and/or water‐content control). The convergence profiles indicate that both schemes preserve the advantages of implicit integration, that is, asymptotic quadratic convergence and unconditional stability. Finally, the performance of the two implicit schemes has been compared with that of an explicit algorithm with automatic sub‐stepping and error control, showing that for the selected breakage model, implicit integration leads to a significant reduction of the computational cost. Such features support the use of the proposed hybrid scheme also in other modeling contexts, especially when strongly nonlinear models have to be implemented and/or validated by using non‐standard hydro‐mechanical control conditions. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

长江漫滩区深大异形基坑施工对紧邻特大型桥梁影响及变形控制研究     

史建升  徐源  李慧  阎长虹  侯珏  俞良晨  赵华新  崔王洪  徐成华  刘刚 《地质论评》2024,70(1):2024010005-2024010005

随着地下空间资源的开发利用,越来越多深基坑呈现出开挖深、规模大、形状不规则等特点,其支护结构设计复杂,施工难度大,具有明显的空间效应。本文以南京地铁某基坑工程为例,分析基坑施工对邻近桥梁的影响。其场区位于长江下游漫滩相二元结构地层分布地段,上部软土层厚度大,下部承压含水层地下水位高、水量丰富,地质条件复杂,该基坑为典型的深大异形基坑,距离某大桥的双曲拱引桥仅为7. 2 m,由于之前桥梁已遭受其他地下工程施工产生的较大变形,所以后续工程对其影响变形控制要求极高。为此,该车站基坑支护结构设计基于地下空间实际功能采用设置分隔墙分区开挖及MJS超深工法墙综合变形控制方案。本文通过有限元数值模拟计算,开展复杂环境下基坑开挖引起的围护结构及桥梁桩基的变形预测分析,计算结果显示,该深大狭长异形基坑开挖对邻近桥梁沉降变形影响显著,通过设置分隔墙分区开挖及MJS工法墙进行变形控制,能够较好地控制基坑的空间效应,减少“长边效应”、“异形效应”等对桥梁沉降变形的影响。通过现场基坑开挖过程实际监测结果,验证这一综合变形控制方案的可行性。该研究成果对于类似复杂地质条件下深大狭长异形基坑的支护及施工设计具有很好的借鉴意义。  相似文献   

顶空进样-固相微萃取测定饮用水源水中吡啶   总被引：2，自引：1，他引：1  

赖永忠 《岩矿测试》2011,30(5):596-600

用75μm CarboxenTM-Polydimethylsiloxane(CAR-PDMS)固相微萃取头顶空萃取15 mL水样中的吡啶,萃取物用气相色谱-质谱法进行分离和检测,采用内标法和质谱的选择离子监测模式进行定量分析。优化了顶空进样-固相微萃取条件,获得较佳的萃取温度(58.0℃)和萃取时间(40 min)。在优化的条件下,方法检出限为1.5μg/L,标准曲线的线性相关系数为0.9994,线性范围为2.5～50.0μg/L;饮用水源水和纯水加标平均回收率为75.6%～81.3%,相对标准偏差(RSD,n=6)为9.60%～12.21%。使用顶空萃取方式可避免样品基体的复杂性,有利于保护萃取头涂层,同时无需使用有机萃取溶剂;使用质谱检测器可减小假阳性带来的影响。顶空进样-固相微萃取操作简单、环保、灵敏度高,适合用于饮用水源水中吡啶的监测分析。  相似文献   

ATLAS III in situ heating test in boom clay: Field data,observation and interpretation   总被引：1，自引：0，他引：1  

G.J. Chen  X. Sillen  J. Verstricht  X.L. Li 《Computers and Geotechnics》2011

The ATLAS III small scale in situ heating test aimed at assessing the thermo-hydro-mechanical (THM) effects on the Boom clay of the significant temperature gradients generated in this host rock as a consequence of the geological disposal of radioactive, heat-emitting wastes. This paper presents data on temperature, pore water pressure and total stress measured during the experiment and highlights several interesting observations regarding the thermal anisotropy and THM coupling in the Boom clay. The test has a simple geometry and well defined boundary conditions, which facilitates the comparison between measurement and numerical modeling studies. These studies included three dimensional coupled THM modeling of the test. The good agreement between measurement and numerical modeling of temperature and pore water pressure yields a set of THM parameters and confirms the thermo-mechanical anisotropy of the Boom clay.  相似文献   

泥岩渗流-应力耦合蠕变损伤模型研究(Ⅱ):数值仿真和参数反演     

贾善坡  陈卫忠  于洪丹  李香玲 《岩土力学》2011,32(10):3163-3170

进一步分析了第Ⅰ部分[1]提出的泥岩渗流-应力耦合蠕变损伤模型。在连续损伤力学理论和比奥(Biot)理论的基础上,导出了考虑渗流-应力-损伤耦合的蠕变损伤有限元格式,建立了弹性预测、塑性修正、损伤修正-渗透系数修正的数值分析框架,编制了非线性有限元分析程序。根据监测的衬砌长期变形数据,采用优化反分析法获得了蠕变损伤模型中的待定参数,并应用于比利时核废料库施工过程中泥岩巷道围岩渗流-应力耦合过程、损伤演化以及长期稳定性分析,研究结果表明,泥岩开挖后渗透性明显增大,约为原岩的120倍,蠕变效应导致泥岩裂隙和渗透性自愈合,约3.5年后渗透性基本恢复到原岩的数量级,围岩中部的蠕变明显大于顶部和底部。研究成果对软岩隧洞长期稳定性的预测与预报具有一定的参考意义。  相似文献   

井筒与油藏耦合的压裂水平井非稳态产能计算模型   总被引：1，自引：0，他引：1  

曾凡辉  郭建春  尹建 《现代地质》2011,25(6):1159-1166

为了准确预测压裂水平井的产量,综合考虑流体在储层、井壁、压裂裂缝、射孔孔眼以及水平井筒中的流动过程,根据势叠加原理,建立了考虑射孔孔眼、压裂裂缝生产干扰作用下的井筒、油藏耦合压裂水平井非稳态产能计算模型。结果表明:只考虑裂缝生产与裂缝、孔眼同时生产时的水平井产量在生产初期差别较大,生产后期差别变小;由于裂缝、孔眼的干扰,水平井筒两端裂缝的产量高于中间裂缝的产量;由于井筒摩阻作用,关于水平井筒中心对称的裂缝流量不相等;随着裂缝长度增加,裂缝、射孔孔眼、水平井产量增大;随着裂缝导流能力增加,裂缝产量增大,射孔孔眼产量降低,水平井产量增大;射孔段越长,孔眼与裂缝的干扰愈强,单个孔眼的产量降低,但由于射孔数增加,水平井产量增大;射孔深度增加,压裂水平井产量增加。  相似文献   

科技交流中心刚性屋面索穹顶结构施工     

钦富彬  马德建 《中国勘察设计》2011,(2):34-37

无锡新区科技交流中心G区部分屋盖采用刚性圆形屋面空间索穹顶结构,该结构体系由上弦脊索、下弦斜索、环索、压杆、外环受压环及内环刚性拉力环构成,为肋环型索穹顶结构体系。索穹顶结构平面为圆形,屋面覆盖材料采用铝板和玻璃结合的刚性屋面,刚性屋面与下部索穹顶结构体系结合,是目前国内第一个空间索穹顶结构实例。施工方法可供类似工程参考。  相似文献